An administrator can access the web
configuration UI of the Huawei Symantec USG using the HTTP or HTTPS service for intuitive
configuration and management.
HTTP
and HTTPS are enabled on
the USG by default. When users use HTTP for access, the device automatically
redirects to use HTTPS instead. If the HTTPS service uses default port 8443 but
port 8443 is used by another service, the device does not use HTTPS for HTTP access.
NOTE
Once you have
used a service to log in to a USG, the service cannot be disabled, and the port
running the service cannot be modified.
Step
1 Choose System > Admin > Settings.
Step
2 Select Enable corresponding to HTTP
Service or HTTPS Service.
Step
3 In the HTTP Port or HTTPS Port text box, enter the port number.
The default HTTP port
number is 80,and the default HTTPS port number is 8443.
Step
4 Click Apply.
----End
After
enabling the HTTP/HTTPS Services, should also know enabling the SFTP/STELNET
Services:
SSH File Transfer Protocol
(SFTP) is short for the SSH File Transfer Protocol. It guarantees secure file
transfer over an insecure network by authenticating the client and encrypting
data in bidirectional mode.
STELNET ensures secure Telnet
services. It guarantees secure file transfer on a traditional insecure network
by authenticating the client and encrypting data in bidirectional mode.
Step
1 Choose System > Admin > Settings.
Step
2 Select Enable corresponding to STELNET
Service or SFTP Service.
The STELNET and
SFTP services can be enabled simultaneously.
Step
3 Enter or select parameters.
Step
4 Click Apply.
Setting
the Web Service Timeout Period
Web service timeout period:
If no operation is performed within this period, you will be informed of an
timeout error upon an operation attempt. You must relog in to the system.
The default value is
recommended.
Step
1 Choose System > Admin > Settings.
Step
2 In the Web Timeout text box, enter the timeout period of the Web service.
Step
3 Click Apply.
----End
More
related Huawei symantec firewall, please visit:
没有评论:
发表评论